Tacoma Rock Sliders for 05+ Toyota Trucks
All-Pro Off Road has done it again with our Tacoma Rock Sliders! We have been an innovator in developing products for the 05+ Tacomas, and that didn’t stop with the addition of the 2016 models. We know that rock sliders must be strong to protect your truck, as well as provide the optimal amount of ground clearance. The rocker panels are one of the most vulnerable areas of your vehicle, so leave it to us to provide you with the protection you need!
Our Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers and Moab. They are built from USA produced heavy-duty .120″ wall tubing. The shape of the outer tube is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up. The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide more ground clearance and door protection. The rear of our Rock Sliders extend outward just before the rear wheels to provide extra bodyprotection where it is needed most.
All-Pro was the first to offer this “Kick-Out” design (since 1998) to protect the rear portion of the cab while maneuvering through tight obstacles. You’ll be glad you have this feature next time you’re wheeling next to a boulder, because as you near the end of the Rock Sliders they will push your truck out and away from danger just in time. Don’t be fooled by other “kick-out” designs that don’t offer enough protection or a smooth transition to the “kick-out”, like ours do. Get the best – Get All-Pro!
Our Extreme-Duty Rock Sliders are an addition to our expanding All-Pro Expedition (APEX) product line. These rock sliders are unmatched in quality, durability, design and function. These sliders offer the same features as our heavy-duty sliders, but are made from hefty 1.75 x .125 wall DOM steel tubing for the outer structure. 2″ square legs that are fully gusseted. They feature a full-length mounting L-bracket that captures existing holes in the side of your frame with minimal drilling only on the underside. Use the included countersunk bolts for a smooth surface with no bolts exposed. Also included is a one-piece CNC laser cut .134″ steel fill plate with dimple die holes and the APEX logo on the kickout portion.
Frequently Asked Questions