FJ Cruiser Rock Sliders | Print |
FJ Cruiser Rock Slider

 Key Features

  • Signature Kick-Out DesignClick To Enlarge
  • High Clearance
  • Fully Gusseted
  • Completely Bolt-On with Included Grade 10.9 Hardware
  • Made in the USA with Domestic Steel
Full Product Description
 
Click To EnlargeAll-Pro Off Road's FJ Cruiser Rock Sliders are the best selling sliders on the market!  Get the protection you need for your rocker panels without robbing valuable ground clearance.  The design and shape of a Rock Slider is very important.  The shape of the outer tube determines how much body protection it will provide as well as how the vehicle slides along obstacles.  We designed these Rock Sliders with our signature "kick-out" design that is proven to help prevent damage to the vulnerable rear quarter panel by pushing your FJ away from the rocks.  When All-Pro originated this "kick-out" design in 1998, we were immediately ridiculed by competitors because they didn't understand the function and how they can improve your ability to maneuver around an obstacle.  Now, due to their popularity, others are offering kickouts, but evidently they still don't understand the purpose since their designs can actually hinder forward motion of the vehicle with their abrupt angles, notches, and junction blocks.  All-Pro's sliders have a gradual kick-out design that allows the tube to slide along the obstacle and easily push the body away from danger as it reaches its most vulnerable area, which is the part of the rocker panel and lower cab area just before the rear tire.  Also, unlike others, our Rock Sliders angle up to provide the most ground clearance possible since there's nothing worse than getting hung up on low hanging armor! 
 
All-Pro Rock Sliders not only look great, but can be used as a jacking point, easily holding the full weight of the vehicle and a Hi-Lift jack can be used at any point along them.  They are designed to stick out just enough to provide the needed protection and to allow for use as a step for roof rack access.  No frame drilling is required since our Rock Sliders easily bolt on to the pre-threaded factory frame holes using the supplied grade 10.9 metric hardware.  We ship these unpainted so you can finish them to your liking.  We recommend using spray paint to allow for easy touch-ups when these sliders get put to good use!  They are the most trail-tested product out there and have held up to the country's toughest rock crawling trails including the Hammers, the Rubicon and Moab.  We encourage you to put them to the test and explore with confidence. 

 

STANDARD DUTY Version - NEW!
NEW!  All-Pro now offers sliders that are the best value on the market!  You can now get All-Pro's #1 selling "kick-out" design for an affordable price.  Made in the USA with domestic 1.75" x .120 wall steel tubing with 1/4" CNC laser cut mounting plates to ensure a perfect fit.  Easy bolt-on installation using the included hardware & instructions.
fjsliderssd_editted_sm fjsliderssd2_editted_sm fjsliderssd3_editted_sm fjsliderssd5_editted_sm
Bolt-on Kick-out design Gussets on all legs Use as step

 

HEAVY DUTY Version
Our Heavy-duty version is Made in the USA using 1.75" steel tubing for the outer tube with 2" steel tubing for the inner tube, and fully welded and gusseted 2" square tubing for the legs. The beefy frame mounting plates are 3/8" thick plate steel (see photo below) to withstand bending or tearing away under extreme abuse.
Click To Enlarge
Click To Enlarge
 
 
Optional Fill Plates
All-Pro Rock Sliders can now be ordered with optional Fill Plates. These plates are welded in to the upper surface of the Rock Slider, creating a step-like surface to aid in entering and exiting the vehicle. Plates are CNC laser cut from 1/8" plate steel, and dimple-died to add rigidity and great looks.  Available for heavy duty version only. 
Click To Enlarge

  
EXTREME DUTY - New APEX Series Rock Sliders - Now Available!
apex-2004-5
Are you looking for the best sliders on the market? Then look no further! All-Pro has recently updated the Extreme Duty version of our FJ Cruiser Rock Sliders, as a new offering in our All-Pro Expedition (APEX) series.  These sliders are top of the line, with no expense spared.  Our APEX Sliders have an unmatched design that is aesthetically pleasing with quality craftsmanship, but most importantly, they are trail proven and provide the utmost in protection for your FJ Cruiser.  These will truly be the last sliders you will ever need to buy!
 
The APEX Sliders are made from beefy 1.75" x .125 wall DOM tubing with full length dimple die plates, along with fully gusseted legs mounted to 3/8" plates. DOM (Drawn Over Mandrel) tubing, which has a higher carbon content which results in a much higher tensile strength than HREW (Hot Roll Electrically Welded). And the cold-working DOM process results in superior dent and bend resistance. We've built DOM versions of most of our products for use on our own vehicles for years, and now we're making these available to the public. We're so confident in our Extreme Duty Rock Sliders that we're offering a LIFETIME WARRANTY against bent tubes!
apex-2004-8 apex-2004-6 apex-2004-7
Laser cut with APEX logo MIG Welded Gusset for rear leg
 
Pricing & Ordering
PRODUCT NAME PRICE PART NO.
Standard Duty FJ Cruiser Rock Sliders (Unpainted) $289.00 2004-AP-SD-KIT

Heavy Duty FJ Cruiser Rock Sliders (Unpainted) $389.00 2004FJ-AP-KIT
Optional Dimple Die Fill Plates for Heavy Duty Version Only +$99.00 2004FJ-AP-PL
Extreme Duty APEX Series FJ Cruiser Rock Sliders, Plated (Unpainted) $589.00 2004-APEX-KT
 
Technical Data
CATEGORY  SPECIFICATION
Material: 

Standard Duty:

Strong .120 Wall Steel Tubing with 1/4" Mounting Plates

Heavy-Duty & Extreme Duty:

Strong .125 Wall Steel Tubing
2" OD Inner Tube
1-¾" OD Slider Tube
2" Square Tube Legs with 3/8" Mounting Plates

Hardware:  Metric Grade 10.9
Weight: 
HREW - 80 lbs. (pair) + 18 lbs for fill plates
DOM - 106 lbs. (pair)
Dimensions:  60" L  (65x20x10" - for shipping)
 
Customer Testimonials
"I put my order in for DOM, and you shocked the cr@p out of me by how fast they showed up at my house .... the end result IS THE BOMB.  Awesome fabrication.  Period.  I have some good stuff on another rig, but, seriously, these are scary perfect.  Experience here with All-Pro? 110% or more satisfaction (more actually)."
-Matt (SuperV3K), Phoenix, AZ
"I am running the All-Pro Rock Sliders and have been very happy with their performance. Having the 'Kick-Out' provides additional protection to the side of my FJ and also gives me better access to the roof rack. I have put the Rock Sliders to use in many tough situations and have found them to hold up well. My Rock Sliders are painted with Rustoleum 'Hammered' paint which allows for easy touch-up."
-Tomas Dawson
www.myfjcruiser.org
 
Frequently Asked Questions
Q: How far do the All-Pro FJ Rock Sliders "stick out"?
A: FJ Rock Sliders stick out approximately 4" from the front door seam. At the rear "kick-out", it extends to about 7" from the rear door seam.
Q: How should I prep these and what paint should I use?
A: Clean with paint thinner, prime, then paint with Rustoleum, Krylon, or the equivalent paint in the color of your choice.
Q: Is powder coat available?
A: Powder coat is available for local pick-up only, for an additional $120.
 
© 2014 All-Pro Off Road  |  Website Design and Hosting by Trinity Web Hosting