Get the clearance & strength you need while adding style! All-Pro Off Road’s ’05+ Tacoma Aluminum Rear Bumper is not just for looks. It will give you peace of mind next time you’re on the trail while weighing in at only 30lbs! The flimsy factory bumper hangs down and gets bent up easily. Often when the stock bumper flexes it will even break your taillights and cause body damage. The All-Pro rear bumpers high clearance design improves departure angle. For recovery or lifting points, two integrated shackle mounts tie directly to vehicle frame brackets.
The bumper’s outer shell is made out of 3/16” CNC laser cut and brake formed aluminum plate. This bumper includes license plate lights and ships unpainted. Factory tow hitches are not compatible with this bumper. We do offer a hidden tow hitch specifically made for this bumper. For additional side protection we offer optional wrap-around side pieces. Fully bolt-on installation is easy using factory hardware.
|Hardware:||Bumper mounts using factory hardware. All neccessary hardware for additional side pieces/hitch will be supplied for those peices.|
Side Pieces—7.0 lbs.
Receiver Hitch—32.0 lbs.
Protective Side Pieces
The optional wrap-around side pieces are fabricated from CNC laser cut and 3/16″ aluminum giving you added protection in the most vulnerable area – the lower rear corners. The side pieces come with stiffener brackets that tie them directly into the frame. They also feature the familiar “AP” logo laser cut into the aluminum and are shipped unpainted with all neccessary hardware included.
High Clearance Tow Hitch
The factory tow hitch isn’t compatible with the All-Pro rear bumper, but we do offer a High Clearance Tow Hitch that is. This hitch is fabricated from gusseted heavy duty materials include 2.5″x 250 wall hitch tube and is made to tuck up inside the All-Pro bumper for virtually no loss of ground clearance or departure angle. When not in use, the hitch is cleverly hidden behind the license plate. Simply remove the plate, or have it mounted onto a receiver hitch or flip-up license plate mount, for easy acess to the hitch. We also include brackets for safety chains and to re-mount your plug receptacle. Easy bolt-on installation using 3 bolts per side. **Note: High Clearance Hitch ONLY works with stock spare tire size.
Note: The rear bumper has (2) 1/8″ diameter holes on the driver’s side to mount the included aluminum logo plate (see photo). Completely read the installation instructions for this product before ordering this bumper. We strongly recommend that you check the fitment of the bumper on your vehicle before having your bumper powder-coated.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov